Call Us At: 1 (866) 957-9993Call Us At: 1 (866) 957-9993
Pillar Holding Bushes ST 7182

Pillar Holding Bushes ST 7182

Description

With holding Clamps

DIN 9825/ISO 9182

Material:

steel 1.7131 (16 Mn Cr 5) case hardened, hardness 58 – 60 HRC inside taper ground mounting diameter ISO j6, ground Suitable to quick-change guide pillars ST 7181

Mounting instructions:

Mount into mounting hole ISO H6, secured with 3 holding clamps ST 7367 (included). Mounting diameter d3 corresponds with diameter of guide bushes with flange ST 742, and with shoulder ST 741. Advantage: same mounting holes in all plates.

Holding clamps:

when reordering the holding clamps, please indicate 1 set = 3 pieces Order number ST 7367

Order example: Pillar holding bushes ST 7182 d1 = 24 bzw. 25, l3 = 37 mm Add 25 x 37 Order number ST 7182.25 x 37

d3j6
d1h3 d5 d6 d8 l1 l3 t
19 and 20 32 40 20 59 39 27 7.5 20 x 27
49 37 17.5 20 x 37
24 and 25 40 48 26 65 49 37 9 25 x 37
59 47 19 25 x 47
30 and 32 48 56 32 73 52 37 9 32 x 37
62 47 19 32 x 47
38 and 40 58 66 42 83 62 47 11 40 x 47
72 57 21 40 x 57
48 and 50 70 80 52 97 65 47 13 50 x 47
75 57 23 50 x 57
60 and 63 85 95 58 112 85 67 15 63 x 67
95 77 25 63 x 77

Share this product

About Champion Tools

Delivering high precision die components to our customers in North America and South America.