Force measuring device SZ 8079

Force measuring device for nitrogen cylinders up to 6300 daN

Version:

Basic frame with hydraulic pump and various adapters.

Application:

All nitrogen cylinders up to a diameter of 120 mm and an initial force of up to 6300 daN can be checked with this force measuring device.

There are 3 different load cells (SZ 8078) that are interchangeable and, depending on the need, must be ordered separately.

Measuring range 25 – 250 daN (SZ 8078.00250)
Measuring range 100 – 1000 daN (SZ 8078.01000)
Measuring range 630 – 6300 daN (SZ 8078.06300)

A load cell from 1600 - 16000 daN is available for nitrogen cylinders with higher pressures. This load cell can be used on a press to check the large nitrogen cylinders.

Attention:

Order load cell separately.

Testing process:

• Install the load cell with the required measuring range.
• Insert the distance bolt for height adjustment.
• Position the nitrogen cylinder in the corresponding fixture.
• Perform the force test by pumping up the hydraulic cylinder.
• Following the conclusion of the force test, open the valve at the hydraulic cylinder and push the cylinder downwards. Remove the nitrogen cylinder.

Order No. SZ 8079